Kicker KEY500.1 Smart Mono Amplifier

Kicker KEY500.1 Smart Mono Amplifier

The KEY500.1 is a smart subwoofer amplifier and audio processor in one, featuring an AI-driven DSP (digital signal processing).

AUTO EQ

Using KICKER’s supplied test tones (below), the KEY automatically analyzes the audio being fed into the amplifier. Once this signal has been analyzed, the amp will automatically fix peaks in the signal coming in and restore the low bass that is typically missing. In a matter of moments, you get a clean, even bass response from your amp!

ALL THE CONTROL

Craft your sound with ease! The KEY500.1 comes with 24dB sub-sonic and low-pass crossovers, bass boost and gain controls.

HIDDEN TREASURE

Measuring about eight inches long and less than two inches high, the KEY500.1 fits nearly anywhere. Mount it behind your glove box, under the seat, or in your trunk with ease.

START. DON’T STOP.

The amplifier also features FIT 2+™ (Fail-safe Integration Technology 2 PLUS) – which provides nearly universal compatibility with stock or aftermarket radios. Another industry first, the KEY500.1 is uniquely suited to accept factory input signals as high as 40 volts (400 watts). The KEY amplifier will work with almost every car on the road today, whether you have a factory or aftermarket audio system.

SUGGESTED ENCLOSURES

While Kicker suggest this list for the ultimate bass experience, KEY500.1 will actually work with all KICKER subwoofers up to 12 inches; see your sales associate for the ideal subwoofer in your particular system, because every system is unique.

  • 4Ω = 150 Watts RMS
  • 2Ω = 300 Watts RMS
  • 1Ω = 500 Watts RMS

Specifications

  • Power (watts/ch), 1 Ohm mono: 500
  • Power (watts/ch), 2 Ohm mono: 300
  • Power (watts/ch), 4 Ohm mono: 150
  • Standard dimensions in.(H x W x L): 1-11/16 x 4-1/8 x 8-1/8
  • Metric dimensions cm(H x W x L): 4.3 x 9.2 x 20.7
  • Frequency Response (Hz): 10-160
  • Input Sensitivity: high level: 1V-40V / low level: 125mV-5V
  • Signal-to-Noise Ratio: >90dB, a-weighted, re: rated power
  • Selectable Electronic Crossover: Variable Low Pass 40-160 Hz, Variable High Pass 10-40 Hz

What's in the Box:

  • 1 - fuse holder
  • 1 - manual and installation hardware

MSRP

  • $249.95

For more information, visit www.kicker.com.

Related Articles

EBC Brakes Two-Piece Fully Floating Rotors for the Tesla Model X/S EBC Brakes Two-Piece Fully Floating Rotors for the Tesla Model X/S
Save 7kg of unsprung rotational mass across the front axle and increase vehicle range with EBC Brakes' two-piece fully-floating rotors, now available...
SCOSCHE Industries Announces Availability of New Scosche/ProClip USA Direct-Fit Device Mounts SCOSCHE Industries Announces Availability of New Scosche/ProClip USA Direct-Fit Device Mounts
Oxnard, Calif. – (May 15, 2020) – SCOSCHE Industries , innovators of award-winning consumer technology are pleased to announce the arrival of their...
Go Fast Bits SV52 Blow-Off Valve Go Fast Bits SV52 Blow-Off Valve
In the race to create the most compact and highest flowing blow-off valve, GFB’s SV52 pulls ahead of the pack. Standing only 86mm tall (including...
Dinan Rear Shock Tower Braces for the BMW E36 & E39 Dinan Rear Shock Tower Braces for the BMW E36 & E39
Legacy parts have long had a tumultuous place within the confines of the Dinan business mold. Catering mainly to new models, legacy parts often were...
Eibach Pro-Truck Coilover 2.0 Eibach Pro-Truck Coilover 2.0
Eibach's all NEW PRO-TRUCK COILOVER 2.0 is here! Developed utilizing their extended-travel monotube design and variable force valving, Eibach PRO-...
Morel Primo Subwoofer Morel Primo Subwoofer
Building on the success of the Ultimo series, the Primo was engineered to offer the Morel build and sound quality to those who are looking for an...