Specialty Products Company Alignment and Suspension Solutions for Subaru BRZ

Specialty Products Company (SPC) provides alignment and suspension solutions for the Subaru BRZ.

These parts should only be installed by personnel who have the necessary skill, training and tools to do the job correctly and safely. Incorrect installation can result in personal injury, vehicle damage and / or loss of vehicle control.

SUBARU REPLACEMENT BUSHING

Replace the worn bushing on the inboard side of the rear lower control arm on many Subaru models from the 2000's to present. Need the toe cam adjuster too? Check out SPC part number 67688 for many 2000 to 2009 models. Part replaces OE #’s 20254AE01A and 20254FG020.

Installation time: .5 hr/side
Required: 1 per wheel
MSRP: $20.98/ea

REAR ADJUSTABLE LOWER CONTROL ARM

This hi-strength adjustable lower rear camber arm provides +/- 2.0 degrees of change for the popular BRZ, FR-S, WRX and Impreza. Get the ultimate in performance and handling with this stamped arm featuring our new xAxis(TM) Sealed Flex Joint which performs like a pillow joint but lasts like an OE joint. This kit is easy to adjust with a cam located at the outboard end of the arm. SPC's control arm is the only kit on the market to include an offset toe bushing to increase the range of your factory toe cam. If you need more toe range consider SPC's toe arm #67655.

Rear Adjustment Range:

Camber - ±2.0°
Toe - 1.5° fixed
Installation Time: .5hr/side
Required: 1 per wheel
Recommended Tools: 67647 Bushing Sleeves, 72509 Ball Joint Press
MSRP: $169.80 /ea

REAR ADJUSTABLE TOE ARM

The Subaru Adjustable Rear Toe EZ Arm provides maximum toe change required due to camber changes. The toe arm incorporates an integrated OE style ball joint and is easily adjusted for positive or negative toe.

Rear Adjustment Range: Toe ±3°
Installation Time: .5 hr / side
Required: 1 per wheel
MSRP: $136.73/ea

EZ CAM XR (14MM - 2)

Dial in Front Camber ±1.75° by replacing the lower bolt of this two bolt strut on the 2012 and up Scion FR-S and Subaru BRZ. Head markings show where the cam is for maximum change and an easy-to-manipulate toothed washer lets you set positive or negative change. SPC uses a hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available.

Front Adjustment Range: Camber ±1.75°
Installation time: .4 hr/side
Required: 1 per axle
MSRP: $26.84/set

For more information, visit www.spcalignment.com.

Rain-X Latitude Water Repellency Wipers Make Winter Driving Bearable

When we say the name Rain-X, some readers might think of the old days of applying a coating to your windshield manually with an applicator or...

Blackjack On The Floor At Ridgeline Lubricants

Over 300 new products. Ridgeline Lubricants expanding product line. We had a great time checking out Ridgeline Lubricants’ first ever SEMA booth at...

Electric Cars Brake Reliably With LIQUI MOLY

Brake Fluid DOT 5.1 EV was developed for the systems of modern vehicles that are also installed in electric vehicles. Many things are different for...

Dress Up Bolts: Not Just for Engine Bays

When you hear the name Dress Up Bolts, you likely think of colored hardware found littered throughout a vehicle's engine bay. What once was a unique...

2022 Black Friday / Cyber Monday Guide

Many companies are releasing Black Friday and Cyber Monday specials quickly, which is wonderful news for anyone hoping to save money now rather than...

Interview w/ Bobby Homayoun of Govad at 2022 Importfest. LS Swapped. Rocket Bunny. Mazda RX-7!

We sat down at with Bobby Homayoun of GOVAD Forged at our Tuning 365 booth 2022 Importfest in Toronto, and he introduced us to his personal Mazda FD...