Unitronic® Stage 2 Performance Software is now available for the B9 2.0 TSI MLB EA888 (CYMC/CYRB) engine found in the 2017-2019 Audi® A4, A4 Allroad, A5 and A5 Sportback. With testing and validations completed, power outputs are increased by +93HP / +101 LB-FT TQ with Unitronic Stage 2 93 octane Performance Software to 345 HP / 374 LB-FT and +85HP / +84 LB-FT TQ with Unitronic Stage 2 91 octane Performance Software to 337 HP / 357 LB-FT, over stock.
Popular features such as Left Foot Braking and Pops and Bangs (Exhaust Crackles/Overrun) are enabled and in order to ensure the ultimate driving experience, Unitronic Stage 2 TCU Software is required along with the Unitronic Intake, Intercooler and Downpipe (COMING SOON) to achieve published power figures.**
FEATURES
- Optimized Responsiveness, Smoothness, Drivability, and Comfort
Unitronic’s ECU calibrations are engineered to improve engine response and reduce low-end lag. Unitronic’s Performance Software has gained worldwide recognition and is well known for its broad powerband, with smooth power delivery, maximizing responsiveness and “area under the curve”, under normal and hard acceleration.
- Ignition Timing Precisely Calibrated for Higher Octane Fuel
Engine calibration optimized to take advantage of higher fuel quality to extract maximum energy from the combustion. Therefore, when using a higher octane fuel, more power and better fuel efficiency will be achieved.
- Left Foot Braking (LFB) Enabled (Stage 2 Only)
LFB allows users to apply load on the engine using their left foot on the brake, to build boost when the edge is needed at the race track.
- Exhaust Crackle/Overrun Enabled (Stage 2 Only)
For North American vehicles. Requires UniConnect+ cable. Subject to availability.
- Optimized Maximum Output
Unitronic’s ECU Calibrators deliver the maximum power output while staying within the operational limits of the factory engine and drivetrain components. Specifically, this results in the highest engine performance without sacrificing the reliability of the engine, turbocharger, or other engine and drivetrain components.
- Factory Safety Limiters Retained
OEM “fail safes” are retained within the ECU calibration. Close monitoring of all operation parameters ensures that engine operation stays within factory components limits, resulting in reliability.
- Power Delivery Perfectly Optimized Throughout the Power Band
Aligned with the OEM strategy, the calibration is designed to offer a large flat torque plateau to provide a smooth and linear power band. Maximum torque output is achieved sooner and maintained longer which creates a broader torque plateau and greater area under the curve. This results in an improved acceleration and optimal engine operation.
- Speed Governor Removed
Vehicle speed limiter within ECU is removed. (Subject to transmission rotational speed limit.)
- Improved Fuel Efficiency
Optimized timing and injection in cruising condition allows for an improved fuel efficiency, under normalized driving conditions.
- Engineered with Strict Industry Standards
With over 10 years of experience with Bosch and Siemens engine management systems and calibrations, Unitronic is able to utilize its expertise, industry leading tools and equipment to ensure an optimal calibration; delivering maximum performance, while maintaining complete OEM-like reliability and drivability.
- Extensively Tested Under Various Driving Conditions
Development begins using Unitronic’s in-house Maha Chassis dyno housed in an environmentally controlled cell; closely monitoring a plethora of operational data, utilizing industry leading calibration tools and resources. Beta calibrations are then tested in street and track scenarios, using multiple cars under various driving conditions. This engine calibration strategy ensures Unitronic Performance Software delivers maximum performance, OEM-like drivability and reliability anywhere in the world. Unitronic Performance Software is only released to its Clients once development is thoroughly completed in accordance to Unitronic’s strict standards.
- Full Staged Software Suite
Includes all Stage 2 Tune variants and all lower Software Stages as well.
These platforms are supported with Unitronic’s UniCONNECT+ cable, empowering you to tune it yourself from the comfort of your own home or garage. The cable and associated software allows you to install, and upgrade, your new Unitronic ECU and TCU tunes, flash back to stock file in addition to reading and clearing DTCs. This is a perfect option for people who like to be autonomous or who live far from a Unitronic Authorized Dealer!
APPLICATIONS
- 2017-2019 Audi A4
- 2017-2019 Audi A4 Allroad
- 2017-2019 Audi A5
- 2017-2019 Audi A5 Sportback
*Subject to ECU box code availability.
**Unitronic cannot guarantee engine performance or longevity if using third party hardware.
For more information, visit www.getunitronic.com.
Related Articles
APR Unveils Ultralink Platform for European Vehicle Performance Tuning
DeatschWerks 850cc / 1100cc Injectors for Toyota Corolla GR / Yaris GR
Shop Tour: Spoon Sports Type One Showroom - Tokyo, Japan
DEI Heat Shroud Line Sleeving
ISC Suspension Street Sport N1 Coilovers for BMW F30 X-Drive
ACT Jeep Wrangler JL / Gladiator JT Applications
