Steve Meade of West Coast Car Audio is seen in this video unboxing, playing and dyno testing the micro AudioControl ACM 1.300 mirco amplifier. "4.300 amps," Meade mentions, "hooked up and playing. They sound great!" He also mentons the amplifiers get pretty loud for a rated 300 watts each. Find out more in this video.
ACM 1.300 Specifications
Inputs
- Preamp Inputs: 2 Balanced
- Preamp Input Voltage Range: 500 mV – 6 V RMS
- Speaker Level Inputs: 2
Outputs
- Rated Continuous (RMS) Power at 14.4V:
- 4 Ω – 175 W RMS
- 2 Ω – 300 W RMS
Performance
- Frequency Response: 10 Hz – 22 kHz
- Signal to Noise: 102 dBA, Ref 175 W @ 4 Ohm
- THD+N: 0.01%
- Power / Ground Wire Gauge: 10 to 4 AWG wire
- Fuse Rating: 1 x 30 A
- Crossover: 12 dB/octave Linkwitz-Riley, 80 Hz, 120 Hz, Bypass
- PFM Subsonic Filter: 24 Hz
ACM 4.300 Specifications
Inputs
- Preamp Inputs: 4 Balanced
- Preamp Input Voltage Range: 500 mV – 6 V RMS
- Speaker Level Inputs: 4
Outputs
- Rated Continuous (RMS) Power at 14.4V:
- 4 Ω – 50 W x 4 RMS
- 2 Ω – 75 W x 4 RMS
- Bridged 4 Ω – 150 W RMS
Performance
- Frequency Response: 10 Hz – 22 kHz
- Signal to Noise: 102 dBA, Ref 50 W @ 4 Ohm
- THD+N: 0.01%
- Power / Ground Wire Gauge: 10 to 4 AWG wire
- Fuse Rating: 1 x 30 A
- Crossover: 12 dB/octave Linkwitz-Riley, 80 Hz, 120 Hz, Bypass
- PFM Subsonic Filter: 32 Hz
For more product information, visit www.audiocontrol.com.
