EXEDY Hyper Multi Plate Series Clutch for 2015 Mitsubishi Lancer Evolution Final Edition

For high-powered applications, EXEDY offers twin and triple Multi-Plate clutches. These are designed for high power street action as well as drag, road and rally racing. The twin plate clutches are rated for approximately 500 ft/lbs of torque and the triple plates are rated for approximately 800 ft/lbs of torque, both figures at the flywheel. Twins come with both spring damper discs or solid discs depending on application, whereas triples are all solid discs and not recommended for street use.

All EXEDY Hyper Multi-Plate clutches come with a lightweight, chromoly steel flywheel and the famous purple anodized forged aluminum clutch cover. Depending on the application, we have both strap drive and lug drive models. All have T5001 cerametallic friction materials for extreme heat resistance. Surprisingly, even with it’s additional power capability, most multi-plate clutches exhibit light pedal pressure thanks to a half-engaged “zone” provided by the patented clutch “cushion” function.

SD/HD Type

This model has been developed for high powered street cars and race cars with up to approximately 600TQ @ FW. They feature ventilated, thick intermediate plates for improved life and spring damper discs to protect your transmission and drive line. “HD” kits have slightly high clamp load than their “SD” counterparts and have approximately 20% higher power capacity.

SDF Type

This model has been developed for high performance street cars with up to approximately 550TQ @ FW. They feature full faced organic friction discs for improved drivability while maintaining excellent power holding capability.

SR Type

These clutch covers are designed to achieve a clamping load that is approx. 40% higher than the genuine part allowing a higher torque transmitting capacity. Ductile material is used for all pressure plates and, high burst strength can be achieved in all temperature ranges.

HR Type

This model has three plates and is developed specifically for high power applications such as over 800 ft/lbs of torque at the flywheel for drag racing. It handles high torque loads and shifts smooth, and because of the lightweight clutch discs, you can reduce your shift times.

All EXEDY Racing Hyper Multi Series Clutch Kits carry SFI 1.2/1.5 Certification. Which means, when you buy these products, you can be confident they are certified for use in competitive motorsports.

MM062HD

• Clamp Load: 2652
• Disc Diameter (Inches): 7.9
• Disc Diameter (Millimeters): 200
• Kit Contents: CM06H, PP02, IM01, DM09DA, DM09DB, FR01, FM59, BS05, BS01, PR01
• Spline Count: 23
• Spline Size (Inches): 1-1/16
• Spline Size (Millimeters): 26.2
• Torque Capacity (ft/lbs.): 615
• Notes: Hyper Twin Cerametallic Clutch, Sprung Center Disc, Pull Type Cover, For use w/ Hyper Accessory Kit MBAK101
• MSRP: $1,883.70 USD

MM063HB

• Clamp Load: 2652
• Disc Diameter (Inches): 7.9
• Disc Diameter (Millimeters): 200
• Kit Contents: CM06H, PP02, IM02, DL03R, DL03R, DL03R, CH16, FR01, FM59, BS05, BS01, PR01
• Spline Count: 23
• Spline Size (Inches): 1-1/16
• Spline Size (Millimeters): 26.2
• Torque Capacity (ft/lbs.): 923
• Notes: Hyper Triple Cerametallic Clutch, Rigid Disc, Pull Type Cover, For use w/ Hyper Accessory Kit MBAK101
• MSRP: $2,957.00 USD

MM063SB

• Clamp Load: 2205
• Disc Diameter (Inches): 7.9
• Disc Diameter (Millimeters): 200
• Kit Contents: CM06S, PP02, IM02, DL03R, DL03R, DL03R, CH16, FR01, FM59, BS05, BS01, PR01
• Spline Count: 23
• Spline Size (Inches): 1-1/16
• Spline Size (Millimeters): 26.2
• Torque Capacity (ft/lbs.): 767
• Notes Hyper: Triple Cerametallic Clutch, Rigid Disc, Pull Type Cover, For use w/ Hyper Accessory Kit MBAK101
• MSRP: $2,957.00 USD

MM062SD

• Clamp Load: 2205
• Disc Diameter (Inches): 7.9
• Disc Diameter (Millimeters): 200
• Kit Contents: CM06S, PP02, IM01, DM09DA, DM09DB, FR01, FM59, BS05, BS01, PR01
• Spline Count: 23
• Spline Size (Inches): 1-1/16
• Spline Size (Millimeters) 26.2
• Torque Capacity (ft/lbs.) 511
• Notes: Hyper Twin Cerametallic Clutch, Sprung Center Disc, Pull Type Cover, For use w/ Hyper Accessory Kit MBAK101
• MSRP: $2,314.17 USD

MM062SDF

• Clamp Load: 2652
• Disc Diameter (Inches): 7.9
• Disc Diameter (Millimeters): 215
• Kit Contents: CM06H, PP02, IM01, FR01, FM59, BS05, BS01, PR01
• Spline Count: 23
• Spline Size (Inches): 1-1/16
• Spline Size (Millimeters): 26.2
• Torque Capacity (ft/lbs.): 553
• Notes: Hyper Twin Organic Clutch, Sprung Center Disc, Pull Type Cover, For use w/ Hyper Accessory Kit MBAK101
• MSRP: $1,877.71 USD

For more information, visit www.exedyusa.com.

Related Articles

APR Unveils Ultralink Platform for European Vehicle Performance Tuning

At-Home Flash Tuning Software Gives Enthusiasts Flexible, Fast and Convenient Access to APR’s Customized Tuning Solutions Unlock the potential of...

MXP Comp RS Single Exit Exhaust for 86/FR-S/BRZ

The Comp RS Exhaust System line from MXP introduces a more aggressive sounding system at a lower price. It’s the perfect exhaust for those seeking...

Dress Up Bolts Titanium Hardware Wing Kit for APR GTC-300 (Evo X)

Dress Up Bolts designed a 30 piece kit for the Mitsubishi Evo X APR GTC-300 Wing. The kit includes bolts, nyloc nuts and washers manufactured...

All Aboard! Dylan Hughes' Turbo-Diesel Powered 2001 BMW 323i Touring Wagon

Photography by Larry Chen Drifting is fun. Tandem drifting with your friends is even more fun. Giving ride-alongs to the homies in your purpose built...

Unitronic Cat-Back Exhaust System for Mk8 VW GTI

Unitronic is proud to release its Cat-Back Exhaust System for the MK8 GTI equipped with the 2.0TSI EVO4 engine. This Cat-Back Exhaust System features...

DEI Turbo Heat Shields

Offered in attractive, easy-to-install designs, the Design Engineering turbo heat shields come in kits that include any necessary locking ties or wire...